欢迎访问《应用生态学报》官方网站,今天是

应用生态学报 ›› 2026, Vol. 37 ›› Issue (3): 707-717.doi: 10.13287/j.1001-9332.202603.025

• 城市气侯与城市设计专栏(专栏策划: 何宝杰、孔繁花) • 上一篇    下一篇

基于计算流体力学和电路理论的城市通风廊道构建:以南京市中心城区为例

高书萌1, 苏杰1, 尹海伟1*, 孔繁花2   

  1. 1南京大学建筑与城市规划学院, 南京 210093;
    2南京大学地理与海洋科学学院, 南京 210093
  • 收稿日期:2025-10-09 接受日期:2026-01-15 出版日期:2026-03-18 发布日期:2026-09-18
  • 通讯作者: *E-mail: qzyinhaiwei@163.com
  • 作者简介:高书萌, 女, 2001年生, 硕士研究生。主要从事城市通风廊道研究。E-mail: gaoshumeng2025@163.com
  • 基金资助:
    国家重点研发计划项目(2024YFF1307104)和国家自然科学基金重点项目(42530514)

Construction of urban ventilation corridor based on computational fluid dynamics and circuit theory: A case study of Nanjing central urban area

GAO Shumeng1, SU Jie1, YIN Haiwei1*, KONG Fanhua2   

  1. 1School of Architecture and Urban Planning, Nanjing University, Nanjing 210093, China;
    2School of Geography and Ocean Science, Nanjing University, Nanjing 210093, China
  • Received:2025-10-09 Accepted:2026-01-15 Online:2026-03-18 Published:2026-09-18

摘要: 通风廊道对缓解城市热岛效应、促进空气流动具有重要作用,对于改善城市风热环境和提升居民生活质量具有重要价值。然而,现有通风廊道构建方法在计算成本、空间精度与研究范围三者间的权衡,以及风流多路径的识别等方面存在局限,且多使用宏观风向和外部固定出入口简化风流,未能考虑城市内部风源的潜力及风环境的空间异质性。针对上述问题,本研究提出一种新的通风廊道构建技术框架,并以南京市中心城区为例阐述了其实现过程:首先,使用计算流体力学(CFD)仿真获得近地风场,并开展城市通风廊道建设适宜性多因子综合评价,然后,使用电路理论结合地表热环境识别城市通风廊道,最后,构建由风源、廊道、修复区组成的城市通风廊道体系。为检验该框架的有效性并评估其优势,本研究采用基于迎风面积指数的最小成本路径方法(FAI-LCP法)开展对比分析。结果表明:基于本研究技术框架构建的南京市中心城区通风廊道体系由6个核心风源、19个次级风源、9条主要廊道和10条次要廊道组成;根据电路理论得出的归一化电流结果,识别出该通风廊道体系的14处修复区,主要分布于内部风源的下风向区域以及次要通风廊道中迎风面积指数较高的区域。与FAI-LCP法相比,本研究技术框架能实现对内部风源的识别、廊道宽度的刻画和通风受阻点的判别,有助于增强通风廊道规划系统性。

关键词: 通风廊道, 计算流体力学, 电路理论, 南京市

Abstract: Ventilation corridors play an important role in alleviating the urban heat island effect and promoting air circulation, which is of great significance for improving the urban wind and heat environment and enhancing the quality of life of residents. However, the available methods for constructing ventilation corridors have limitations in terms of the balance among computational cost, spatial accuracy and research scope, as well as the identification of multiple air flow paths. Moreover, those methods mostly simplify air flow by using macroscopic wind direction and external fixed entrances and exits, overlooking the potential of internal urban wind sources and the spatial heterogeneity of the wind environment. In response to the above issues, we proposed a new technical framework for the construction of ventilation corridors and took Nanjing central urban area as an example to elaborate its implementation process. Firstly, we used the computational fluid dynamics (CFD) simulation to obtain the near-ground wind field, and carried out the multi-factor comprehensive evaluation of urban ventilation corridor construction suitability. Then, we identified the urban ventilation corridor by combining circuit theory with the land surface thermal environment. Finally, we constructed an urban ventilation corridor system composed of wind sources, corridors, and restoration zones. To test the effectiveness of this framework and evaluate its advantages, we conducted a comparative analysis using the least cost path method based on the frontal area index (FAI-LCP method). The results based on the technical frame work of this study showed that there were 6 core wind sources, 19 secondary wind sources, 9 primary ventilation corridors and 10 secondary corridors in the urban ventilation corridor system of Nanjing central urban area. Based on the normalized current flow results obtained from circuit theory, 14 restoration zones of the ventilation corridor system were identified, mainly distributed in the downwind areas of the internal wind sources and the areas with a higher frontal area index in the secondary ventilation corridors. Compared with the FAI-LCP method, our technical framework could achieve the identification of internal wind sources, the characterization of corridor width and the discrimination of ventilation obstruction points, which would be conducive to enhancing the systematicness of ventilation corridor planning.

Key words: ventilation corridor, computational fluid dynamics, circuit theory, Nanjing