应用生态学报 ›› 2011, Vol. 22 ›› Issue (12): 3150-3156.
黄宇1,林智勇2,荣俊冬1,陈礼光1,郑郁善1**
HUANG Yu1, LIN Zhi-yong2, RONG Jun-dong1, CHEN Li-guang1, ZHENG Yu-shan1
摘要: 以1年生雷公藤扦插苗为试材,研究低温胁迫下不同浓度外源脱落酸(ABA,0、5、10、15、20、25 mg·L-1)叶面喷施处理对雷公藤叶片光合作用及叶绿素荧光参数的影响.结果表明:喷施20 mg·L-1的ABA能显著提高雷公藤幼苗的抗冷性,减缓低温下雷公藤叶片净光合速率(Pn)、蒸腾速率(Tr)、气孔导度(gs)、胞间CO2浓度(Ci)的下降幅度,提高幼苗叶片的光合能力.低温处理6 d后,随着ABA浓度上升,雷公藤叶片的初始荧光(Fo)下降,最大荧光(Fm)和PSII最大光化学效率(Fv/Fm)上升,PSII实际光化学量子产量(ΦPSⅡ)、光化学猝灭系数(qP)先下降后上升,而非光化学猝灭系数(qN)呈下降-上升-下降趋势.Pn、gs、qP、Fm和Fv/Fm均在20 mg·L-1ABA处理时达到峰值.不同浓度ABA的相对电子传递速率(rETR)随着光化光强度增加呈先上升后下降的趋势,当光化光强度(PAR)达到395 μmol·m-2s-1时,各处理的rETR达到最高值,其中25 mg·L-1和20 mg·L-1ABA处理分别比对照高17.1%和5.2%.雷公藤叶片ΦPSⅡ的光响应曲线均随光化光强度升高而下降,qN的光响应曲线则呈相反趋势.